The Powered by Docker is a series of blog posts featuring use cases and success stories from Docker partners and practitioners. This story was contributed by Neal Patel from Siimpl.io. Neal has more than ten years of experience developing software and is a Docker Captain.

Background

As a platform engineer at a mid-size startup, I’m responsible for identifying bottlenecks and developing solutions to streamline engineering operations to keep up with the velocity and scale of the engineering organization. In this post, I outline some of the challenges we faced with one of our clients, how we addressed them, and provide guides on how to tackle these challenges at your company.

One of our clients faced critical engineering challenges, including poor synchronization between development and CI/CD environments, slow incident response due to inadequate rollback mechanisms, and fragmented telemetry tools that delayed issue resolution. Siimpl implemented strategic solutions to enhance development efficiency, improve system reliability, and streamline observability, turning obstacles into opportunities for growth.

Let’s walk through the primary challenges we encountered.

Inefficient development and deployment

• Problem: We lacked parity between developer tooling and CI/CD tooling, which made it difficult for engineers to test changes confidently.
• Goal: We needed to ensure consistent environments across development, testing, and production.

Unreliable incident response

• Problem: If a rollback was necessary, we did not have the proper infrastructure to accomplish this efficiently.
• Goal: We wanted to revert to stable versions in case of deployment issues easily.

Lack of comprehensive telemetry

• Problem: Our SRE team created tooling to simplify collecting and publishing telemetry, but distribution and upgradability were poor. Also, we found adoption to be extremely low.
• Goal: We needed to standardize how we configure telemetry collection, and simplify the configuration of auto-instrumentation libraries so the developer experience is turnkey.

Solution: Efficient development and deployment

CI/CD configuration with self-hosted GitHub runners and Docker Buildx

We had a requirement for multi-architecture support (arm64/amd64), which we initially implemented in CI/CD with Docker Buildx and QEMU. However, we noticed an extreme dip in performance due to the emulated architecture build times.

We were able to reduce build times by almost 90% by ditching QEMU (emulated builds), and targeting arm64 and amd64 self-hosted runners. This gave us the advantage of blazing-fast native architecture builds, but still allowed us to support multi-arch by publishing the manifest after-the-fact. 

Here’s a working example of the solution we will walk through: https://github.com/siimpl/multi-architecture-cicd

If you’d like to deploy this yourself, there’s a guide in the README.md.

Prerequisites

This project uses the following tools:

• Docker Build Cloud (included in all Docker paid subscriptions.)
• DBC cloud driver
• GitHub/GitHub Actions
• A managed container orchestration service like Elastic Kubernetes Service (EKS), Azure Kubernetes Service (AKS), or  Google Kubernetes Engine (GKE)
• Terraform
• Helm

Because this project uses industry-standard tooling like Terraform, Kubernetes, and Helm, it can be easily adapted to any CI/CD or cloud solution you need.

Key features

The secret sauce of this solution is provisioning the self-hosted runners in a way that allows our CI/CD to specify which architecture to execute the build on.

The first step is to provision two node pools — an amd64 node pool and an arm64 node pool, which can be found in the aks.tf. In this example, the node_count is fixed at 1 for both node pools but for better scalability/flexibility you can also enable autoscaling for a dynamic pool.

resource "azurerm_kubernetes_cluster_node_pool" "amd64" {
  name                  = "amd64pool"
  kubernetes_cluster_id = azurerm_kubernetes_cluster.cicd.id
  vm_size               = "Standard_DS2_v2" # AMD-based instance
  node_count            = 1
  os_type               = "Linux"
  tags = {
    environment = "dev"
  }
}

resource "azurerm_kubernetes_cluster_node_pool" "arm64" {
  name                  = "arm64pool"
  kubernetes_cluster_id = azurerm_kubernetes_cluster.cicd.id
  vm_size               = "Standard_D4ps_v5" # ARM-based instance
  node_count            = 1
  os_type               = "Linux"
  tags = {
    environment = "dev"
  }
}

Next, we need to update the self-hosted runners’ values.yaml to have a configurable nodeSelector. This will allow us to deploy one runner scale set to the arm64pool and one to the amd64pool.

Once the Terraform resources are successfully created, the runners should be registered to the organization or repository you specified in the GitHub config URL. We can now update the REGISTRY values for the emulated-build and the native-build.

After creating a pull request with those changes, navigate to the Actions tab to witness the results.

You should see two jobs kick off, one using the emulated build path with QEMU, and the other using the self-hosted runners for native node builds. Depending on cache hits or the Dockerfile being built, the performance improvements can be up to 90%. Even with this substantial improvement, utilizing Docker Build Cloud can improve performance 95%. More importantly, you can reap the benefits during development builds! Take a look at the docker-build-cloud.yml workflow for more details. All you need is a Docker Build Cloud subscription and a cloud driver to take advantage of the improved pipeline.

Getting Started

1. Generate GitHub PAT

2. Update the variables.tf

3. Initialise AZ CLI

4. Deploy Cluster

5. Create a PR to validate pipelines

README.md for reference

Reliable Incident Response

Leveraging SemVer Tagged Containers for Easy Rollback

Recognizing that deployment issues can arise unexpectedly, we needed a mechanism to quickly and reliably rollback production deployments. Below is an example workflow for properly rolling back a deployment based on the tagging strategy we implemented above.

1. Rollback Process:
   • In case of a problematic build, deployment was rolled back to a previous stable version using the tagged images.
   • AWS CLI commands were used to update ECS services with the desired image tag:

on:
  workflow_call:
    inputs:
      image-version:
        required: true
        type: string
jobs:
  rollback:
    runs-on: ubuntu-latest
    permissions:
      id-token: write
      context: read
    steps:
     - name: Rollback to previous version
       run: |
         aws ecs update-service --cluster my-cluster --service my-service --force-new-deployment --image ${{ secrets.REGISTRY }}/myapp:${{ inputs.image-version }}

Comprehensive Telemetry

Configuring Sidecar Containers in ECS for Aggregating/Publishing Telemetry Data (OTEL)

As we adopted a OpenTelemetry to standardize observability, we quickly realized that adoption was one of the toughest hurdles. As a team, we decided to bake in as much configuration as possible into the infrastructure (Terraform modules) so that we could easily distribute and maintain observability instrumentation.

1. Sidecar Container Setup:
   • Sidecar containers were defined in the ECS task definitions to run OpenTelemetry collectors.
   • The collectors were configured to aggregate and publish telemetry data from the application containers.
2. Task Definition Example:

{
  "containerDefinitions": [
    {
      "name": "myapp",
      "image": "myapp:1.0.0",
      "essential": true,
      "portMappings": [{ "containerPort": 8080 }]
    },
    {
      "name": "otel-collector",
      "image": "otel/opentelemetry-collector:latest",
      "essential": false,
      "portMappings": [{ "containerPort": 4317 }],
      "environment": [
        { "name": "OTEL_RESOURCE_ATTRIBUTES", "value": "service.name=myapp" }
      ]
    }
  ],
  "family": "my-task"
}

Configuring Multi-Stage Dockerfiles for OpenTelemetry Auto-Instrumentation Libraries (Node.js)

At the application level, configuring the auto-instrumentation posed a challenge since most applications varied in their build process. By leveraging multi-stage Dockerfiles, we were able to help standardize the way we initialized the auto-instrumentation libraries across microservices. We were primarily a nodejs shop, so below is an example Dockerfile for that.

1. Multi-Stage Dockerfile:
   • The Dockerfile is divided into stages to separate the build environment from the final runtime environment, ensuring a clean and efficient image.
   • OpenTelemetry libraries are installed in the build stage and copied to the runtime stage:

# Stage 1: Build stage
FROM node:20 AS build
WORKDIR /app
COPY package.json package-lock.json ./
# package.json defines otel libs (ex. @opentelemetry/node @opentelemetry/tracing)
RUN npm install
COPY . .
RUN npm run build

# Stage 2: Runtime stage
FROM node:20
WORKDIR /app
COPY --from=build /app /app
CMD ["node", "dist/index.js"]

Results

By addressing these challenges we were able to reduce build times by ~90%, which alone dropped our DORA metrics for Lead time for changes and Time to restore by ~50%. With the rollback strategy and telemetry changes, we were able to reduce our Mean time to Detect (MTTD) and Mean time to resolve (MTTR) by ~30%. We believe that it could get to 50-60% with tuning of alerts and the addition of runbooks (automated and manual).

1. Enhanced Development Efficiency: Consistent environments across development, testing, and production stages sped up the development process, and roughly 90% faster build times with the native architecture solution.
2. Reliable Rollbacks: Quick and efficient rollbacks minimized downtime and maintained system integrity.
3. Comprehensive Telemetry: Sidecar containers enabled detailed monitoring of system health and security without impacting application performance, and was baked right into the infrastructure developers were deploying. Auto-instrumentation of the application code was simplified drastically with the adoption of our Dockerfiles.

Siimpl: Transforming Enterprises with Cloud-First Solutions

With Docker at the core, Siimpl.io’s solutions demonstrate how teams can build faster, more reliable, and scalable systems. Whether you’re optimizing CI/CD pipelines, enhancing telemetry, or ensuring secure rollbacks, Docker provides the foundation for success. Try Docker today to unlock new levels of developer productivity and operational efficiency.

Learn more from our website or contact us at solutions@siimpl.io

Hey there, fellow engineers and tech enthusiasts! I’m excited to share one of my favorite strategies for modern software delivery: combining Docker and Jenkins to power up your CI/CD pipelines. 

Throughout my career as a Senior DevOps Engineer and Docker Captain, I’ve found that these two tools can drastically streamline releases, reduce environment-related headaches, and give teams the confidence they need to ship faster.

In this post, I’ll walk you through what Docker and Jenkins are, why they pair perfectly, and how you can build and maintain efficient pipelines. My goal is to help you feel right at home when automating your workflows. Let’s dive in.

Brief overview of continuous integration and continuous delivery

Continuous integration (CI) and continuous delivery (CD) are key pillars of modern development. If you’re new to these concepts, here’s a quick rundown:

• Continuous integration (CI): Developers frequently commit their code to a shared repository, triggering automated builds and tests. This practice prevents conflicts and ensures defects are caught early.
• Continuous delivery (CD): With CI in place, organizations can then confidently automate releases. That means shorter release cycles, fewer surprises, and the ability to roll back changes quickly if needed.

Leveraging CI/CD can dramatically improve your team’s velocity and quality. Once you experience the benefits of dependable, streamlined pipelines, there’s no going back.

Why combine Docker and Jenkins for CI/CD?

Docker allows you to containerize your applications, creating consistent environments across development, testing, and production. Jenkins, on the other hand, helps you automate tasks such as building, testing, and deploying your code. I like to think of Jenkins as the tireless “assembly line worker,” while Docker provides identical “containers” to ensure consistency throughout your project’s life cycle.

Here’s why blending these tools is so powerful:

• Consistent environments: Docker containers guarantee uniformity from a developer’s laptop all the way to production. This consistency reduces errors and eliminates the dreaded “works on my machine” excuse.
• Speedy deployments and rollbacks: Docker images are lightweight. You can ship or revert changes at the drop of a hat — perfect for short delivery process cycles where minimal downtime is crucial.
• Scalability: Need to run 1,000 tests in parallel or support multiple teams working on microservices? No problem. Spin up multiple Docker containers whenever you need more build agents, and let Jenkins orchestrate everything with Jenkins pipelines.

For a DevOps junkie like me, this synergy between Jenkins and Docker is a dream come true.

Setting up your CI/CD pipeline with Docker and Jenkins

Before you roll up your sleeves, let’s cover the essentials you’ll need:

• Docker Desktop (or a Docker server environment) installed and running. You can get Docker for various operating systems.
• Jenkins downloaded from Docker Hub or installed on your machine. These days, you’ll want jenkins/jenkins:lts (the long-term support image) rather than the deprecated library/jenkins image.
• Proper permissions for Docker commands and the ability to manage Docker images on your system.
• A GitHub or similar code repository where you can store your Jenkins pipeline configuration (optional, but recommended).

Pro tip: If you’re planning a production setup, consider a container orchestration platform like Kubernetes. This approach simplifies scaling Jenkins, updating Jenkins, and managing additional Docker servers for heavier workloads.

Building a robust CI/CD pipeline with Docker and Jenkins

After prepping your environment, it’s time to create your first Jenkins-Docker pipeline. Below, I’ll walk you through common steps for a typical pipeline — feel free to modify them to fit your stack.

1. Install necessary Jenkins plugins

Jenkins offers countless plugins, so let’s start with a few that make configuring Jenkins with Docker easier:

• Docker Pipeline Plugin
• Docker
• CloudBees Docker Build and Publish

How to install plugins:

1. Open Manage Jenkins > Manage Plugins in Jenkins.
2. Click the Available tab and search for the plugins listed above.
3. Install them (and restart Jenkins if needed).

Code example (plugin installation via CLI):

# Install plugins using Jenkins CLI
java -jar jenkins-cli.jar -s http://<jenkins-server>:8080/ install-plugin docker-pipeline
java -jar jenkins-cli.jar -s http://<jenkins-server>:8080/ install-plugin docker
java -jar jenkins-cli.jar -s http://<jenkins-server>:8080/ install-plugin docker-build-publish

Pro tip (advanced approach): If you’re aiming for a fully infrastructure-as-code setup, consider using Jenkins configuration as code (JCasC). With JCasC, you can declare all your Jenkins settings — including plugins, credentials, and pipeline definitions — in a YAML file. This means your entire Jenkins configuration is version-controlled and reproducible, making it effortless to spin up fresh Jenkins instances or apply consistent settings across multiple environments. It’s especially handy for large teams looking to manage Jenkins at scale.

Reference:

• Jenkins Plugin Installation Guide.
• Jenkins Configuration as Code Plugin.

2. Set up your Jenkins pipeline

In this step, you’ll define your pipeline. A Jenkins “pipeline” job uses a Jenkinsfile (stored in your code repository) to specify the steps, stages, and environment requirements.

Example Jenkinsfile:

pipeline {
    agent any
    stages {
        stage('Checkout') {
            steps {
                git branch: 'main', url: 'https://github.com/your-org/your-repo.git'
            }
        }
        stage('Build') {
            steps {
                script {
                    dockerImage = docker.build("your-org/your-app:${env.BUILD_NUMBER}")
                }
            }
        }
        stage('Test') {
            steps {
                sh 'docker run --rm your-org/your-app:${env.BUILD_NUMBER} ./run-tests.sh'
            }
        }
        stage('Push') {
            steps {
                script {
                    docker.withRegistry('https://index.docker.io/v1/', 'dockerhub-credentials') {
                        dockerImage.push()
                    }
                }
            }
        }
    }
}

Let’s look at what’s happening here:

1. Checkout: Pulls your repository.
2. Build: Creates a built docker image (your-org/your-app) with the build number as a tag.
3. Test: Runs your test suite inside a fresh container, ensuring Docker containers create consistent environments for every test run.
4. Push: Pushes the image to your Docker registry (e.g., Docker Hub) if the tests pass.

Reference: Jenkins Pipeline Documentation.

3. Configure Jenkins for automated builds

Now that your pipeline is set up, you’ll want Jenkins to run it automatically:

• Webhook triggers: Configure your source control (e.g., GitHub) to send a webhook whenever code is pushed. Jenkins will kick off a build immediately.
• Poll SCM: Jenkins periodically checks your repo for new commits and starts a build if it detects changes.

Which trigger method should you choose?

• Webhook triggers are ideal if you want near real-time builds. As soon as you push to your repo, Jenkins is notified, and a new build starts almost instantly. This approach is typically more efficient, as Jenkins doesn’t have to continuously check your repository for updates. However, it requires that your source control system and network environment support webhooks.
• Poll SCM is useful if your environment can’t support incoming webhooks — for example, if you’re behind a corporate firewall or your repository isn’t configured for outbound hooks. In that case, Jenkins routinely checks for new commits on a schedule you define (e.g., every five minutes), which can add a small delay and extra overhead but may simplify setup in locked-down environments.

Personal experience: I love webhook triggers because they keep everything as close to real-time as possible. Polling works fine if webhooks aren’t feasible, but you’ll see a slight delay between code pushes and build starts. It can also generate extra network traffic if your polling interval is too frequent.

4. Build, test, and deploy with Docker containers

Here comes the fun part — automating the entire cycle from build to deploy:

1. Build Docker image: After pulling the code, Jenkins calls docker.build to create a new image.
2. Run tests: Automated or automated acceptance testing runs inside a container spun up from that image, ensuring consistency.
3. Push to registry: Assuming tests pass, Jenkins pushes the tagged image to your Docker registry — this could be Docker Hub or a private registry.
4. Deploy: Optionally, Jenkins can then deploy the image to a remote server or a container orchestrator (Kubernetes, etc.).

This streamlined approach ensures every step — build, test, deploy — lives in one cohesive pipeline, preventing those “where’d that step go?” mysteries.

5. Optimize and maintain your pipeline

Once your pipeline is up and running, here are a few maintenance tips and enhancements to keep everything running smoothly:

• Clean up images: Routine cleanup of Docker images can reclaim space and reduce clutter.
• Security updates: Stay on top of updates for Docker, Jenkins, and any plugins. Applying patches promptly helps protect your CI/CD environment from vulnerabilities.
• Resource monitoring: Ensure Jenkins nodes have enough memory, CPU, and disk space for builds. Overworked nodes can slow down your pipeline and cause intermittent failures.

Pro tip: In large projects, consider separating your build agents from your Jenkins controller by running them in ephemeral Docker containers (also known as Jenkins agents). If an agent goes down or becomes stale, you can quickly spin up a fresh one — ensuring a clean, consistent environment for every build and reducing the load on your main Jenkins server.

Why use Declarative Pipelines for CI/CD?

Although Jenkins supports multiple pipeline syntaxes, Declarative Pipelines stand out for their clarity and resource-friendly design. Here’s why:

• Simplified, opinionated syntax: Everything is wrapped in a single pipeline { ... } block, which minimizes “scripting sprawl.” It’s perfect for teams who want a quick path to best practices without diving deeply into Groovy specifics.
• Easier resource allocation: By specifying an agent at either the pipeline level or within each stage, you can offload heavyweight tasks (builds, tests) onto separate worker nodes or Docker containers. This approach helps prevent your main Jenkins controller from becoming overloaded.
• Parallelization and matrix builds: If you need to run multiple test suites or support various OS/browser combinations, Declarative Pipelines make it straightforward to define parallel stages or set up a matrix build. This tactic is incredibly handy for microservices or large test suites requiring different environments in parallel.
• Built-in “escape hatch”: Need advanced Groovy features? Just drop into a script block. This lets you access Scripted Pipeline capabilities for niche cases, while still enjoying Declarative’s streamlined structure most of the time.
• Cleaner parameterization: Want to let users pick which tests to run or which Docker image to use? The parameters directive makes your pipeline more flexible. A single Jenkinsfile can handle multiple scenarios — like unit vs. integration testing — without duplicating stages.

Declarative Pipeline examples

Below are sample pipelines to illustrate how declarative syntax can simplify resource allocation and keep your Jenkins controller healthy.

Example 1: Basic Declarative Pipeline

pipeline {
    agent any
    stages {
        stage('Build') {
            steps {
                echo 'Building...'
            }
        }
        stage('Test') {
            steps {
                echo 'Testing...'
            }
        }
    }
}

• Runs on any available Jenkins agent (worker).
• Uses two stages in a simple sequence.

Example 2: Stage-level agents for resource isolation

pipeline {
    agent none  // Avoid using a global agent at the pipeline level
    stages {
        stage('Build') {
            agent { docker 'maven:3.9.3-eclipse-temurin-17' }
            steps {
                sh 'mvn clean package'
            }
        }
        stage('Test') {
            agent { docker 'openjdk:17-jdk' }
            steps {
                sh 'java -jar target/my-app-tests.jar'
            }
        }
    }
}

• Each stage runs in its own container, preventing any single node from being overwhelmed.
• agent none at the top ensures no global agent is allocated unnecessarily.

Example 3: Parallelizing test stages

pipeline {
    agent none
    stages {
        stage('Test') {
            parallel {
                stage('Unit Tests') {
                    agent { label 'linux-node' }
                    steps {
                        sh './run-unit-tests.sh'
                    }
                }
                stage('Integration Tests') {
                    agent { label 'linux-node' }
                    steps {
                        sh './run-integration-tests.sh'
                    }
                }
            }
        }
    }
}

• Splits tests into two parallel stages.
• Each stage can run on a different node or container, speeding up feedback loops.

Example 4: Parameterized pipeline

pipeline {
    agent any

    parameters {
        choice(name: 'TEST_TYPE', choices: ['unit', 'integration', 'all'], description: 'Which test suite to run?')
    }

    stages {
        stage('Build') {
            steps {
                echo 'Building...'
            }
        }
        stage('Test') {
            when {
                expression { return params.TEST_TYPE == 'unit' || params.TEST_TYPE == 'all' }
            }
            steps {
                echo 'Running unit tests...'
            }
        }
        stage('Integration') {
            when {
                expression { return params.TEST_TYPE == 'integration' || params.TEST_TYPE == 'all' }
            }
            steps {
                echo 'Running integration tests...'
            }
        }
    }
}

• Lets you choose which tests to run (unit, integration, or both).
• Only executes relevant stages based on the chosen parameter, saving resources.

Example 5: Matrix builds

pipeline {
    agent none

    stages {
        stage('Build and Test Matrix') {
            matrix {
                agent {
                    label "${PLATFORM}-docker"
                }
                axes {
                    axis {
                        name 'PLATFORM'
                        values 'linux', 'windows'
                    }
                    axis {
                        name 'BROWSER'
                        values 'chrome', 'firefox'
                    }
                }
                stages {
                    stage('Build') {
                        steps {
                            echo "Build on ${PLATFORM} with ${BROWSER}"
                        }
                    }
                    stage('Test') {
                        steps {
                            echo "Test on ${PLATFORM} with ${BROWSER}"
                        }
                    }
                }
            }
        }
    }
}

• Defines a matrix of PLATFORM x BROWSER, running each combination in parallel.
• Perfect for testing multiple OS/browser combinations without duplicating pipeline logic.

Additional resources:

• Jenkins Pipeline Syntax: Official reference for sections, directives, and advanced features like matrix, parallel, and post conditions.
• Jenkins Pipeline Steps Reference: Comprehensive list of steps you can call in your Jenkinsfile.
• Jenkins Configuration as Code Plugin (JCasC): Ideal for version-controlling your Jenkins configuration, including plugin installations and credentials.
  

Using Declarative Pipelines helps ensure your CI/CD setup is easier to maintain, scalable, and secure. By properly configuring agents — whether Docker-based or label-based — you can spread workloads across multiple worker nodes, minimize resource contention, and keep your Jenkins controller humming along happily.

Best practices for CI/CD with Docker and Jenkins

Ready to supercharge your setup? Here are a few tried-and-true habits I’ve cultivated:

• Leverage Docker’s layer caching: Optimize your Dockerfiles so stable (less frequently changing) layers appear early. This drastically reduces build times.
• Run tests in parallel: Jenkins can run multiple containers for different services or microservices, letting you test them side by side. Declarative Pipelines make it easy to define parallel stages, each on its own agent.
• Shift left on security: Integrate security checks early in the pipeline. Tools like Docker Scout let you scan images for vulnerabilities, while Jenkins plugins can enforce compliance policies. Don’t wait until production to discover issues.
• Optimize resource allocation: Properly configure CPU and memory limits for Jenkins and Docker containers to avoid resource hogging. If you’re scaling Jenkins, distribute builds across multiple worker nodes or ephemeral agents for maximum efficiency.
• Configuration management: Store Jenkins jobs, pipeline definitions, and plugin configurations in source control. Tools like Jenkins Configuration as Code simplify versioning and replicating your setup across multiple Docker servers.

With these strategies — plus a healthy dose of Declarative Pipelines — you’ll have a lean, high-octane CI/CD pipeline that’s easier to maintain and evolve.

Troubleshooting Docker and Jenkins Pipelines

Even the best systems hit a snag now and then. Here are a few hurdles I’ve seen (and conquered):

• Handling environment variability: Keep Docker and Jenkins versions synced across different nodes. If multiple Jenkins nodes are in play, standardize Docker versions to avoid random build failures.
• Troubleshooting build failures: Use docker logs -f <container-id> to see exactly what happened inside a container. Often, the logs reveal missing dependencies or misconfigured environment variables.
• Networking challenges: If your containers need to talk to each other — especially across multiple hosts — make sure you configure Docker networks or an orchestration platform properly. Read Docker’s networking documentation for details, and check out the Jenkins diagnosing issues guide for more troubleshooting tips.

Conclusion

Pairing Docker and Jenkins offers a nimble, robust approach to CI/CD. Docker locks down consistent environments and lightning-fast rollouts, while Jenkins automates key tasks like building, testing, and pushing your changes to production. When these two are in harmony, you can expect shorter release cycles, fewer integration headaches, and more time to focus on developing awesome features.

A healthy pipeline also means your team can respond quickly to user feedback and confidently roll out updates — two crucial ingredients for any successful software project. And if you’re concerned about security, there are plenty of tools and best practices to keep your applications safe.

I hope this guide helps you build (and maintain) a high-octane CI/CD pipeline that your team will love. If you have questions or need a hand, feel free to reach out on the community forums, join the conversation on Slack, or open a ticket on GitHub issues. You’ll find plenty of fellow Docker and Jenkins enthusiasts who are happy to help.

Thanks for reading, and happy building!

Learn more

• Subscribe to the Docker Newsletter. 
• Take a deeper dive in Docker’s official Jenkins integration documentation.
• Explore Docker Business for comprehensive CI/CD security at scale.
• Get the latest release of Docker Desktop.
• Have questions? The Docker community is here to help.
• New to Docker? Get started.

One of the challenges in modern software development is being able to release software often and with confidence. This can only be achieved when you have a good CI/CD setup in place that can test your software and release it with minimal or even no human intervention. But modern software applications also use a wide range of third-party dependencies and often need to run on multiple operating systems and architectures. 

In this post, I will explain how the combination of Bazel and Testcontainers helps developers build and release software by providing a hermetic build system.

Using Bazel and Testcontainers together

Bazel is an open source build tool developed by Google to build and test multi-language, multi-platform projects. Several big IT companies have adopted monorepos for various reasons, such as:

• Code sharing and reusability 
• Cross-project refactoring 
• Consistent builds and dependency management 
• Versioning and release management

With its multi-language support and focus on reproducible builds, Bazel shines in building such monorepos.

A key concept of Bazel is hermeticity, which means that when all inputs are declared, the build system can know when an output needs to be rebuilt. This approach brings determinism where, given the same input source code and product configuration, it will always return the same output by isolating the build from changes to the host system.

Testcontainers is an open source framework for provisioning throwaway, on-demand containers for development and testing use cases. Testcontainers make it easy to work with databases, message brokers, web browsers, or just about anything that can run in a Docker container.

Using Bazel and Testcontainers together offers the following features:

• Bazel can build projects using different programming languages like C, C++, Java, Go, Python, Node.js, etc.
• Bazel can dynamically provision the isolated build/test environment with desired language versions.
• Testcontainers can provision the required dependencies as Docker containers so that your test suite is self-contained. You don’t have to manually pre-provision the necessary services, such as databases, message brokers, and so on. 
• All the test dependencies can be expressed through code using Testcontainers APIs, and you avoid the risk of breaking hermeticity by sharing such resources between tests.

Let’s see how we can use Bazel and Testcontainers to build and test a monorepo with modules using different languages.
We are going to explore a monorepo with a customers module, which uses Java, and a products module, which uses Go. Both modules interact with relational databases (PostgreSQL) and use Testcontainers for testing.

Getting started with Bazel

To begin, let’s get familiar with Bazel’s basic concepts. The best way to install Bazel is by using Bazelisk. Follow the official installation instructions to install Bazelisk. Once it’s installed, you should be able to run the Bazelisk version and Bazel version commands:

$ brew install bazelisk
$ bazel version

Bazelisk version: v1.12.0
Build label: 7.0.0

Before you can build a project using Bazel, you need to set up its workspace. 

A workspace is a directory that holds your project’s source files and contains the following files:

• The WORKSPACE.bazel file, which identifies the directory and its contents as a Bazel workspace and lives at the root of the project’s directory structure.
• A MODULE.bazel file, which declares dependencies on Bazel plugins (called “rulesets”).
• One or more BUILD (or BUILD.bazel) files, which describe the sources and dependencies for different parts of the project. A directory within the workspace that contains a BUILD file is a package.

In the simplest case, a MODULE.bazel file can be an empty file, and a BUILD file can contain one or more generic targets as follows:

genrule(
    name = "foo",
    outs = ["foo.txt"],
    cmd_bash = "sleep 2 && echo 'Hello World' >$@",
)

genrule(
    name = "bar",
    outs = ["bar.txt"],
    cmd_bash = "sleep 2 && echo 'Bye bye' >$@",
)

Here, we have two targets: foo and bar. Now we can build those targets using Bazel as follows:

$ bazel build //:foo <- runs only foo target, // indicates root workspace
$ bazel build //:bar <- runs only bar target
$ bazel build //... <- runs all targets

Configuring the Bazel build in a monorepo

We are going to explore using Bazel in the testcontainers-bazel-demo repository. This repository is a monorepo with a customers module using Java and a products module using Go. Its structure looks like the following:

testcontainers-bazel-demo
|____customers
| |____BUILD.bazel
| |____src
|____products
| |____go.mod
| |____go.sum
| |____repo.go
| |____repo_test.go
| |____BUILD.bazel
|____MODULE.bazel

Bazel uses different rules for building different types of projects. Bazel uses rules_java for building Java packages, rules_go for building Go packages, rules_python for building Python packages, etc.

We may also need to load additional rules providing additional features. For building Java packages, we may want to use external Maven dependencies and use JUnit 5 for running tests. In that case, we should load rules_jvm_external to be able to use Maven dependencies. 

We are going to use Bzlmod, the new external dependency subsystem, to load the external dependencies. In the MODULE.bazel file, we can load the additional rules_jvm_external and contrib_rules_jvm as follows:

bazel_dep(name = "contrib_rules_jvm", version = "0.21.4")
bazel_dep(name = "rules_jvm_external", version = "5.3")

maven = use_extension("@rules_jvm_external//:extensions.bzl", "maven")
maven.install(
   name = "maven",
   artifacts = [
       "org.postgresql:postgresql:42.6.0",
       "ch.qos.logback:logback-classic:1.4.6",
       "org.testcontainers:postgresql:1.19.3",
       "org.junit.platform:junit-platform-launcher:1.10.1",
       "org.junit.platform:junit-platform-reporting:1.10.1",
       "org.junit.jupiter:junit-jupiter-api:5.10.1",
       "org.junit.jupiter:junit-jupiter-params:5.10.1",
       "org.junit.jupiter:junit-jupiter-engine:5.10.1",
   ],
)
use_repo(maven, "maven")

Let’s understand the above configuration in the MODULE.bazel file:

• We have loaded the rules_jvm_external rules from Bazel Central Registry and loaded extensions to use third-party Maven dependencies.
• We have configured all our Java application dependencies using Maven coordinates in the maven.install artifacts configuration.
• We are loading the contrib_rules_jvm rules that supports running JUnit 5 tests as a suite.

Now, we can run the @maven//:pin program to create a JSON lockfile of the transitive dependencies, in a format that rules_jvm_external can use later:

bazel run @maven//:pin

Rename the generated file rules_jvm_external~4.5~maven~maven_install.json to maven_install.json. Now update the MODULE.bazel to reflect that we pinned the dependencies.

Add a lock_file attribute to the maven.install() and update the use_repo call to also expose the unpinned_maven repository used to update the dependencies:

maven.install(
    ...
    lock_file = "//:maven_install.json",
)

use_repo(maven, "maven", "unpinned_maven")

Now, when you update any dependencies, you can run the following command to update the lock file:

​​bazel run @unpinned_maven//:pin

Let’s configure our build targets in the customers/BUILD.bazel file, as follows:

load(
 "@bazel_tools//tools/jdk:default_java_toolchain.bzl",
 "default_java_toolchain", "DEFAULT_TOOLCHAIN_CONFIGURATION", "BASE_JDK9_JVM_OPTS", "DEFAULT_JAVACOPTS"
)

default_java_toolchain(
 name = "repository_default_toolchain",
 configuration = DEFAULT_TOOLCHAIN_CONFIGURATION,
 java_runtime = "@bazel_tools//tools/jdk:remotejdk_17",
 jvm_opts = BASE_JDK9_JVM_OPTS + ["--enable-preview"],
 javacopts = DEFAULT_JAVACOPTS + ["--enable-preview"],
 source_version = "17",
 target_version = "17",
)

load("@rules_jvm_external//:defs.bzl", "artifact")
load("@contrib_rules_jvm//java:defs.bzl", "JUNIT5_DEPS", "java_test_suite")

java_library(
   name = "customers-lib",
   srcs = glob(["src/main/java/**/*.java"]),
   deps = [
       artifact("org.postgresql:postgresql"),
       artifact("ch.qos.logback:logback-classic"),
   ],
)

java_library(
   name = "customers-test-resources",
   resources = glob(["src/test/resources/**/*"]),
)

java_test_suite(
   name = "customers-lib-tests",
   srcs = glob(["src/test/java/**/*.java"]),
   runner = "junit5",
   test_suffixes = [
       "Test.java",
       "Tests.java",
   ],
   runtime_deps = JUNIT5_DEPS,
   deps = [
       ":customers-lib",
       ":customers-test-resources",
       artifact("org.junit.jupiter:junit-jupiter-api"),
       artifact("org.junit.jupiter:junit-jupiter-params"),
       artifact("org.testcontainers:postgresql"),
   ],
)

Let’s understand this BUILD configuration:

• We have loaded default_java_toolchain and then configured the Java version to 17.
• We have configured a java_library target with the name customers-lib that will build the production jar file.
• We have defined a java_test_suite target with the name customers-lib-tests to define our test suite, which will execute all the tests. We also configured the dependencies on the other target customers-lib and external dependencies.
• We also defined another target with the name customers-test-resources to add non-Java sources (e.g., logging config files) to our test suite target as a dependency.

In the customers package, we have a CustomerService class that stores and retrieves customer details in a PostgreSQL database. And we have CustomerServiceTest that tests CustomerService methods using Testcontainers. Take a look at the GitHub repository for the complete code.

Note: You can use Gazelle, which is a Bazel build file generator, to generate the BUILD.bazel files instead of manually writing them.

Running Testcontainers tests

For running Testcontainers tests, we need a Testcontainers-supported container runtime. Let’s assume you have a local Docker installed using Docker Desktop.

Now, with our Bazel build configuration, we are ready to build and test the customers package:

# to run all build targets of customers package
$ bazel build //customers/...

# to run a specific build target of customers package
$ bazel build //customers:customers-lib

# to run all test targets of customers package
$ bazel test //customers/...

# to run a specific test target of customers package
$ bazel test //customers:customers-lib-tests

When you run the build for the first time, it will take time to download the required dependencies and then execute the targets. But, if you try to build or test again without any code or configuration changes, Bazel will not re-run the build/test again and will show the cached result. Bazel has a powerful caching mechanism that will detect code changes and run only the targets that are necessary to run.

While using Testcontainers, you define the required dependencies as part of code using Docker image names along with tags, such as Postgres:16. So, unless you change the code (e.g., Docker image name or tag), Bazel will cache the test results.

Similarly, we can use rules_go and Gazelle for configuring Bazel build for Go packages. Take a look at the MODULE.bazel and products/BUILD.bazel files to learn more about configuring Bazel in a Go package.

As mentioned earlier, we need a Testcontainers-supported container runtime for running Testcontainers tests. Installing Docker on complex CI platforms might be challenging, and you might need to use a complex Docker-in-Docker setup. Additionally, some Docker images might not be compatible with the operating system architecture (e.g., Apple M1). 

Testcontainers Cloud solves these problems by eliminating the need to have Docker on the localhost or CI runners and run the containers on cloud VMs transparently.

Here is an example of running the Testcontainers tests using Bazel on Testcontainers Cloud using GitHub Actions:

name: CI

on:
 push:
   branches:
     - '**'

jobs:
 build:
   runs-on: ubuntu-latest
   steps:
   - uses: actions/checkout@v4

   - name: Configure TestContainers cloud
     uses: atomicjar/testcontainers-cloud-setup-action@main
     with:
       wait: true
       token: ${{ secrets.TC_CLOUD_TOKEN }}

   - name: Cache Bazel
     uses: actions/cache@v3
     with:
       path: |
         ~/.cache/bazel
       key: ${{ runner.os }}-bazel-${{ hashFiles('.bazelversion', '.bazelrc', 'WORKSPACE', 'WORKSPACE.bazel', 'MODULE.bazel') }}
       restore-keys: |
         ${{ runner.os }}-bazel-

   - name: Build and Test
     run: bazel test --test_output=all //...

GitHub Actions runners already come with Bazelisk installed, so we can use Bazel out of the box. We have configured the TC_CLOUD_TOKEN environment variable through Secrets and started the Testcontainers Cloud agent. If you check the build logs, you can see that the tests are executed using Testcontainers Cloud.

Summary

We have shown how to use the Bazel build system to build and test monorepos with multiple modules using different programming languages. Combined with Testcontainers, you can make the builds self-contained and hermetic.

Although Bazel and Testcontainers help us have a self-contained build, we need to take extra measures to make it a hermetic build: 

• Bazel can be configured to use a specific version of SDK, such as JDK 17, Go 1.20, etc., so that builds always use the same version instead of what is installed on the host machine. 
• For Testcontainers tests, using Docker tag latest for container dependencies may result in non-deterministic behavior. Also, some Docker image publishers override the existing images using the same tag. To make the build/test deterministic, always use the Docker image digest so that the builds and tests always use the exact same version of images that gives reproducible and hermetic builds.
• Using Testcontainers Cloud for running Testcontainers tests reduces the complexity of Docker setup and gives a deterministic container runtime environment.

Visit the Testcontainers website to learn more, and get started with Testcontainers Cloud by creating a free account.

Learn more

• Visit the Testcontainers website.
• Get started with Testcontainers Cloud by creating a free account.
• Get the latest release of Docker Desktop.
• Vote on what’s next! Check out our public roadmap.
• Have questions? The Docker community is here to help.
• New to Docker? Get started.

We dive into the challenges faced with Argo CD’s current synchronization strategy. Despite its wide adoption for managing Kubernetes deployments, there are cracks in the system’s design, particularly when it comes to handling sync operations. We’ll explore why Argo CD’s insistence on strong consistency is causing more problems than it solves and discuss how an eventual consistency model could be the game-changer that Argo CD needs to streamline deployment workflows and minimize outages.

▬▬▬▬▬▬ Additional Info ▬▬▬▬▬▬
Gist with the commands: https://gist.github.com/vfarcic/82e08206a786bc4373f7325af1d3fea9
Kubernetes Deployment Order: https://argoproj.github.io/cd/
Kubernetes? Database Schema? Schema Management with Atlas Operator: https://youtu.be/1iZoEFzlvhM
Manage Kubernetes Secrets With External Secrets Operator (ESO): https://youtu.be/SyRZe5YVCVk
Argo CD – Applying GitOps Principles To Manage A Production Environment In Kubernetes: https://youtu.be/vpWQeoaiRM4
How To Apply GitOps To Everything – Combining Argo CD And Crossplane: https://youtu.be/yrj4lmScKHQ
Mastering Argo CD Sync Waves: A Deep Dive into Effective GitOps Synchronization Strategies: https://youtu.be/LKuRtOTvlXk
Crossplane – GitOps-based Infrastructure as Code through Kubernetes API: https://youtu.be/n8KjVmuHm7A
How To Shift Left Infrastructure Management Using Crossplane Compositions: https://youtu.be/AtbS1u2j7po
Crossplane Composition Functions: Unleashing the Full Potential: https://youtu.be/jjtpEhvwgMw

▬▬▬▬▬▬ Sponsorships ▬▬▬▬▬▬
If you are interested in sponsoring this channel, please use https://calendly.com/vfarcic/meet to book a timeslot that suits and we’ll go over the details. Or feel free to contact me over Twitter or LinkedIn (see below)

▬▬▬▬▬▬ Livestreams & podcasts ▬▬▬▬▬▬
Podcast: https://www.devopsparadox.com/
Live streams: https://www.youtube.com/c/DevOpsParadox

▬▬▬▬▬▬ Contact me ▬▬▬▬▬▬
Follow me on Twitter: https://twitter.com/vfarcic
Follow me on LinkedIn: https://www.linkedin.com/in/viktorfarcic/

Releasing software often and with confidence relies on a strong continuous integration and continuous delivery (CI/CD) process that includes the ability to automate tests. Jenkins offers an open source automation server that facilitates such release of software projects.

In this article, we will explore how you can run tests based on the open source Testcontainers framework in a Jenkins pipeline using Docker and Testcontainers Cloud. 

Jenkins, which streamlines the development process by automating the building, testing, and deployment of code changes, is widely adopted in the DevOps ecosystem. It supports a vast array of plugins, enabling integration with various tools and technologies, making it highly customizable to meet specific project requirements.

Testcontainers is an open source framework for provisioning throwaway, on-demand containers for development and testing use cases. Testcontainers makes it easy to work with databases, message brokers, web browsers, or just about anything that can run in a Docker container.

Testcontainers also provides support for many popular programming languages, including Java, Go, .NET, Node.js, Python, and more. This article will show how to test a Java Spring Boot application (testcontainers-showcase) using Testcontainers in a Jenkins pipeline. Please fork the repository into your GitHub account. To run Testcontainers-based tests, a Testcontainers-supported container runtime, like Docker, needs to be available to agents.

Note: As Jenkins CI servers are mostly run on Linux machines, the following configurations are tested on a Linux machine only.

Docker containers as Jenkins agents

Let’s see how to use dynamic Docker container-based agents. To be able to use Docker containers as agents, install the Docker Pipeline plugin. 

Now, let’s create a file with name Jenkinsfile in the root of the project with the following content:

pipeline {
   agent {
       docker {
             image 'eclipse-temurin:17.0.9_9-jdk-jammy'
             args '--network host -u root -v /var/run/docker.sock:/var/run/docker.sock'
       }
 }

   triggers { pollSCM 'H/2 * * * *' } // poll every 2 mins

   stages {
       stage('Build and Test') {
           steps {
               sh './mvnw verify'
           }
       }
   }
}

We are using the eclipse-temurin:17.0.9_9-jdk-jammy Docker container as an agent to run the builds for this pipeline. Note that we are mapping the host’s Unix Docker socket as a volume with root user permissions to make it accessible to the agent, but this can potentially be a security risk.

Add the Jenkinsfile and push the changes to the Git repository.

Now, go to the Jenkins Dashboard and select New Item to create the pipeline. Follow these steps:

• Enter testcontainers-showcase as pipeline name.
• Select Pipeline as job type.
• Select OK.
• Under Pipeline section:
  • Select Definition: Pipeline script from SCM.
  • SCM: Git.
  • Repository URL: https://github.com/YOUR_GITHUB_USERNAME/testcontainers-showcase.git. Replace YOUR_GITHUB_USERNAME with your actual GitHub username.
• Branches to build: Branch Specifier (blank for ‘any’): */main.
• Script Path: Jenkinsfile.
• Select Save.
• Choose Build Now to trigger the pipeline for the first time.

The pipeline should run the Testcontainers-based tests successfully in a container-based agent using the remote Docker-in-Docker based configuration.

Kubernetes pods as Jenkins agents

While running Testcontainers-based tests on Kubernetes pods, you can run a Docker-in-Docker (DinD) container as a sidecar. To use Kubernetes pods as Jenkins agents, install Kubernetes plugin.

Now you can create the Jenkins pipeline using Kubernetes pods as agents as follows:

def pod =
"""
apiVersion: v1
kind: Pod
metadata:
 labels:
   name: worker
spec:
 serviceAccountName: jenkins
 containers:
   - name: java17
     image: eclipse-temurin:17.0.9_9-jdk-jammy
     resources:
       requests:
         cpu: "1000m"
         memory: "2048Mi"
     imagePullPolicy: Always
     tty: true
     command: ["cat"]
   - name: dind
     image: docker:dind
     imagePullPolicy: Always
     tty: true
     env:
       - name: DOCKER_TLS_CERTDIR
         value: ""
     securityContext:
       privileged: true
"""

pipeline {
   agent {
       kubernetes {
           yaml pod
       }
   }
   environment {
       DOCKER_HOST = 'tcp://localhost:2375'
       DOCKER_TLS_VERIFY = 0
   }

   stages {
       stage('Build and Test') {
           steps {
               container('java17') {
                   script {
                       sh "./mvnw verify"
                   }
               }
           }
       }
   }
}

Although we can use a Docker-in-Docker based configuration to make the Docker environment available to the agent, this setup also brings configuration complexities and security risks.

• By volume mounting the host’s Docker Unix socket (Docker-out-of-Docker) with the agents, the agents have direct access to the host Docker engine.
• When using DooD approach file sharing, using bind-mounting doesn’t work because the containerized app and Docker engine work in different contexts. 
• The Docker-in-Docker (DinD) approach requires the use of insecure privileged containers.

You can watch the Docker-in-Docker: Containerized CI Workflows presentation to learn more about the challenges of a Docker-in-Docker based CI setup.

This is where Testcontainers Cloud comes into the picture to make it easy to run Testcontainers-based tests more simply and reliably. 

By using Testcontainers Cloud, you don’t even need a Docker daemon running on the agent. Containers will be run in on-demand cloud environments so that you don’t need to use powerful CI agents with high CPU/memory for your builds.

Let’s see how to use Testcontainers Cloud with minimal setup and run Testcontainers-based tests.

Testcontainers Cloud-based setup

Testcontainers Cloud helps you run Testcontainers-based tests at scale by spinning up the dependent services as Docker containers on the cloud and having your tests connect to those services.

If you don’t have a Testcontainers Cloud account already, you can create an account and get a Service Account Token as follows:

1. Sign up for a Testcontainers Cloud account.
2. Once logged in, create an organization.
3. Navigate to the Testcontainers Cloud dashboard and generate a Service account (Figure 1).

To use Testcontainers Cloud, we need to start a lightweight testcontainers-cloud agent by passing TC_CLOUD_TOKEN as an environment variable.

You can store the TC_CLOUD_TOKEN value as a secret in Jenkins as follows:

• From the Dashboard, select Manage Jenkins.
• Under Security, choose Credentials.
• You can create a new domain or use System domain.
• Under Global credentials, select Add credentials.
• Select Kind as Secret text.
• Enter TC_CLOUD_TOKEN value in Secret.
• Enter tc-cloud-token-secret-id as ID.
• Select Create.

Next, you can update the Jenkinsfile as follows:

pipeline {
   agent {
       docker {
             image 'eclipse-temurin:17.0.9_9-jdk-jammy'
       }
 }

   triggers { pollSCM 'H/2 * * * *' }

   stages {

       stage('TCC SetUp') {
     environment {
      	 TC_CLOUD_TOKEN = credentials('tc-cloud-token-secret-id')
           }
           steps {
               sh "curl -fsSL https://get.testcontainers.cloud/bash | sh"
           }
       }

       stage('Build and Test') {
           steps {
               sh './mvnw verify'
           }
       }
   }
}

We have set the TC_CLOUD_TOKEN environment variable using the value from tc-cloud-token-secret-id credential we created and started a Testcontainers Cloud agent before running our tests.

Now if you commit and push the updated Jenkinsfile, then the pipeline will run the tests using Testcontainers Cloud. You should see log statements similar to the following indicating that the Testcontainers-based tests are using Testcontainers Cloud instead of the default Docker daemon.

14:45:25.748 [testcontainers-lifecycle-0] INFO  org.testcontainers.DockerClientFactory - Connected to docker: 
  Server Version: 78+testcontainerscloud (via Testcontainers Desktop 1.5.5)
  API Version: 1.43
  Operating System: Ubuntu 20.04 LTS
  Total Memory: 7407 MB

You can also leverage Testcontainers Cloud’s Turbo mode in conjunction with build tools that feature parallel run capabilities to run tests even faster.

In the case of Maven, you can use the -DforkCount=N system property to specify the degree of parallelization. For Gradle, you can specify the degree of parallelization using the maxParallelForks property.

We can enable parallel execution of our tests using four forks in Jenkinsfile as follows:

stage('Build and Test') {
      steps {
           sh './mvnw verify -DforkCount=4' 
      }
}

For more information, check out the article on parallelizing your tests with Turbo mode.

Conclusion

In this article, we have explored how to run Testcontainers-based tests on Jenkins CI using dynamic containers and Kubernetes pods as agents with Docker-out-of-Docker and Docker-in-Docker based configuration. 

Then we learned how to create a Testcontainers Cloud account and configure the pipeline to run tests using Testcontainers Cloud. We also explored leveraging Testcontainers Cloud Turbo mode combined with your build tool’s parallel execution capabilities. 

Although we have demonstrated this setup using a Java project as an example, Testcontainers libraries exist for other popular languages, too, and you can follow the same pattern of configuration to run your Testcontainers-based tests on Jenkins CI in Golang, .NET, Python, Node.js, etc.

Get started with Testcontainers Cloud by creating a free account at the website.

Learn more

• Sign up for a Testcontainers Cloud account.
• Watch the Docker-in-Docker: Containerized CI Workflows session from DockerCon 2023.
• Subscribe to the Docker Newsletter.
• Get the latest release of Docker Desktop.
• Vote on what’s next! Check out our public roadmap.
• Have questions? The Docker community is here to help.
• New to Docker? Get started.

As DevOps continues to evolve, the number of tools, platforms, and services available to practitioners is growing exponentially. With so many options, it can be difficult to know which ones are right for your team and your organization.

In this video, we’ll take a look at some of the best DevOps tools, platforms, and services and choose which ones we should use in 2024.

▬▬▬▬▬▬ Additional Info ▬▬▬▬▬▬
Gist with the commands: manuscript/devops/devops-tools-2024.sh

▬▬▬▬▬▬ Sponsorships ▬▬▬▬▬▬
If you are interested in sponsoring this channel, please use https://calendly.com/vfarcic/meet to book a timeslot that suits and we’ll go over the details. Or feel free to contact me over Twitter or LinkedIn (see below)

▬▬▬▬▬▬ Livestreams & podcasts ▬▬▬▬▬▬
Podcast: https://www.devopsparadox.com/
Live streams: https://www.youtube.com/c/DevOpsParadox

▬▬▬▬▬▬ Contact me ▬▬▬▬▬▬
Follow me on Twitter: https://twitter.com/vfarcic
Follow me on LinkedIn: https://www.linkedin.com/in/viktorfarcic/

The rise of open source software has led to more collaborative development, but it’s not without challenges. While public container images offer convenience and access to a vast library of prebuilt components, their lack of control and potential vulnerabilities can introduce security and reliability risks into your CI/CD pipeline.

This blog post delves into best practices that your teams can implement to mitigate these risks and maintain a secure and reliable software delivery process. By following these guidelines, you can leverage the benefits of open source software while safeguarding your development workflow.

1. Store local copies of public containers

To minimize risks and improve security and reliability, consider storing local copies of public container images whenever feasible. The Open Containers Initiative offers guidelines on consuming public content, which you can access for further information.

2. Use authentication when accessing Docker Hub

For secure and reliable CI/CD pipelines, authenticating with Docker Hub instead of using anonymous access is recommended. Anonymous access exposes you to security vulnerabilities and increases the risk of hitting rate limits, hindering your pipeline’s performance.

The specific authentication method depends on your CI/CD infrastructure and Google Cloud services used. Fortunately, several options are available to ensure secure and efficient interactions with Docker Hub.

3. Use Artifact Registry remote repositories 

Instead of directly referencing Docker Hub repositories in your build processes, opt for Artifact Registry remote repositories for secure and efficient access. This approach leverages Docker Hub access tokens, minimizing the risk of vulnerabilities and facilitating a seamless workflow.

Detailed instructions on configuring this setup can be found in the following Artifact Registry documentation: Configure remote repository authentication to Docker Hub.

4. Use Google Cloud Build to interact with Docker images 

Google Cloud Build offers robust authentication mechanisms to pull Docker Hub images seamlessly within your build steps. These mechanisms are essential if your container images rely on external dependencies hosted on Docker Hub. By implementing these features, you can ensure secure and reliable access to the necessary resources while streamlining your CI/CD pipeline.

Implementing the best practices outlined above offers significant benefits for your CI/CD pipelines. You’ll achieve a stronger security posture and reduced reliability risks, ensuring smooth and efficient software delivery. Additionally, establishing robust authentication controls for your development environments prevents potential roadblocks that could arise later in production. As a result, you can be confident that your processes comply with or surpass corporate security standards, further solidifying your development foundation.

Learn more

Visit the following product pages to learn more about the features that assist you in implementing these steps.

• Take control of your supply chain with Artifact Registry remote and virtual repositories
• Analyze images to prioritize and remediate software supply chain issues with Docker Scout 
• Artifact Registry Product Page
• Google Cloud Build Product Page

In this video, we will take a look at some of the common mistakes that people make when building CI/CD pipelines, and we will show you how Dagger can help you to avoid these mistakes.

Dagger is a set of libraries enable us to write CI (not CI/CD) pipelines in a variety of languages (NodeJS, Python, Elixir, etc.), that can run anywhere (locally, remotely, in other pipeline tools), and that is based on Docker or other container runtimes.

It replaces many of the tasks we normally write in Jenkins, GitHub Actions, Argo Workflows, Tekton, CircleCI, and other remote pipeline solutions.

▬▬▬▬▬▬ Additional Info ▬▬▬▬▬▬

Gist with the commands: manuscript/pipelines/dagger.sh
Dagger: https://dagger.io
Your CI/CD Pipelines Are Wrong – From Monoliths To Events: https://youtu.be/TSQ0QpfCi1c
Is CUE The Perfect Language For Kubernetes Manifests (Helm Templates Replacement)?: https://youtu.be/m6g0aWggdUQ
Is Timoni With CUE a Helm Replacement?: https://youtu.be/bbE1BFCs548

▬▬▬▬▬▬ Sponsorships ▬▬▬▬▬▬
If you are interested in sponsoring this channel, please use https://calendly.com/vfarcic/meet to book a timeslot that suits and we’ll go over the details. Or feel free to contact me over Twitter or LinkedIn (see below)

▬▬▬▬▬▬ Livestreams & podcasts ▬▬▬▬▬▬
Podcast: https://www.devopsparadox.com/
Live streams: https://www.youtube.com/c/DevOpsParadox

▬▬▬▬▬▬ Contact me ▬▬▬▬▬▬
Follow me on Twitter: https://twitter.com/vfarcic
Follow me on LinkedIn: https://www.linkedin.com/in/viktorfarcic/

This video explores the common mistakes encountered when building Internal Developer Platforms (IDP) and streamlining Software Development Life Cycle (SDLC).

▬▬▬▬▬▬ Additional Info ▬▬▬▬▬▬
SDLC and platform engineering: https://youtu.be/TSQ0QpfCi1c

▬▬▬▬▬▬ Sponsorships ▬▬▬▬▬▬
If you are interested in sponsoring this channel, please use https://calendly.com/vfarcic/meet to book a timeslot that suits and we’ll go over the details. Or feel free to contact me over Twitter or LinkedIn (see below)

▬▬▬▬▬▬ Livestreams & podcasts ▬▬▬▬▬▬
Podcast: https://www.devopsparadox.com/
Live streams: https://www.youtube.com/c/DevOpsParadox

▬▬▬▬▬▬ Contact me ▬▬▬▬▬▬
Follow me on Twitter: https://twitter.com/vfarcic
Follow me on LinkedIn: https://www.linkedin.com/in/viktorfarcic/

Kubernetes is a powerful container orchestration platform that can be used to run a wide variety of applications. But what are the best types of workloads to run in Kubernetes? And how do you decide?

In this video, we take a comprehensive look at what to run in Kubernetes. We will discuss the benefits of running different types of workloads in Kubernetes, as well as the challenges and considerations to keep in mind.

▬▬▬▬▬▬ Sponsoships ▬▬▬▬▬▬
If you are interested in sponsoring this channel, please use https://calendly.com/vfarcic/meet to book a timeslot that suits and we’ll go over the details. Or feel free to contact me over Twitter or LinkedIn (see below)

▬▬▬▬▬▬ Livestreams & podcasts ▬▬▬▬▬▬
Podcast: https://www.devopsparadox.com/
Live streams: https://www.youtube.com/c/DevOpsParadox

▬▬▬▬▬▬ Contact me ▬▬▬▬▬▬
Follow me on Twitter: https://twitter.com/vfarcic
Follow me on LinkedIn: https://www.linkedin.com/in/viktorfarcic/

This video delves into testing techniques with KUTTL, a testing tool for Kubernetes. Demystify Kubernetes by exploring how KUTTL simplifies testing processes, enhances reliability, and ensures seamless deployment of applications on Kubernetes clusters.

▬▬▬▬▬▬ Additional Info ▬▬▬▬▬▬

Gist with the commands: https://gist.github.com/vfarcic/d54940365e29111539e6744c50eae794
KUTTL: https://kuttl.dev
How to run local multi-node Kubernetes clusters using kind: https://youtu.be/C0v5gJSWuSo
Is Timoni With CUE a Helm Replacement?: https://youtu.be/bbE1BFCs548
Do NOT Use Docker Compose! Develop In Kubernetes (With Okteto): https://youtu.be/RTo9Pvo_yiY
DevSpace – Development Environments in Kubernetes: https://youtu.be/nQly_CEjJc4
Development Environments Made Easy With Tilt Rebuilds And Live Updates: https://youtu.be/fkODRlobR9I
Skaffold – How to Build and Deploy In Kubernetes: https://youtu.be/qS_4Qf8owc0

▬▬▬▬▬▬ Sponsoships ▬▬▬▬▬▬
If you are interested in sponsoring this channel, please use https://calendly.com/vfarcic/meet to book a timeslot that suits and we’ll go over the details. Or feel free to contact me over Twitter or LinkedIn (see below)

▬▬▬▬▬▬ Livestreams & podcasts ▬▬▬▬▬▬
Podcast: https://www.devopsparadox.com/
Live streams: https://www.youtube.com/c/DevOpsParadox

▬▬▬▬▬▬ Contact me ▬▬▬▬▬▬
Follow me on Twitter: https://twitter.com/vfarcic
Follow me on LinkedIn: https://www.linkedin.com/in/viktorfarcic/